超低照度下微光图像增强神经网络损失函数设计分析

超低照度下(环境照度小于2×10~(-3)lux)微光图像具有低信噪比、低对比度等特点,使目标难以辨识,严重影响观察效果。为了提高超低照度下微光图像质量,设计了一种用于微光图像增强的卷积自编码深度神经网络,并针对传统的均方误差损失函数不符合人类视觉感知特性等问题,结合现有的全参考图像质量评价指标,研究了包括感知损失在内的几种损失函数,并提出了一种新的可微分损失函数。实验结果表明,在网络结构不发生改变的情况下,所提损失函数具有更好的性能,在提高微光图像信噪比和对比度的同时,能够有效地增强图像内部细节信息。     

Al-Mn 多层膜离子束混合

离子束混合是一种材料改性和新材料研制的有效方法,本实验用Ａｒ＋离子束对Ａｌ－Ｍｎ多层薄膜在室温下进行轰击使其非晶化,并对样品电阻率随离子注入剂量及温度的变化关系进行原位测量．电阻温度系数ＴＣＲ和ＴＥＭ观测证实了样品离子束混合后电性能和结构发生改变生成了非晶相．     

超声辅助喷射电沉积Ni镀层的表面形貌及硬度

试验以直接超声方式,在喷射电沉积装置的基础上加载超声设备,分别在20℃和50℃两种镀液温度下在A3钢基体上制备了加载超声和不加载超声Ni镀层,研究了超声波及温度对Ni镀层表面形貌和硬度的影响。试验结果分析表明：在20℃条件下,超声可避免镀层裂纹的产生,提高镀层的硬度;在50℃条件下,超声可细化镀层的组织,且可显著提高镀层硬度;超声波对喷射电沉积层组织和性能的影响机理主要在于超声空化引起的析氢减少、细晶强化和加工硬度。     

横向运动板干扰聚能射流的数值模拟

基于有限元分析软件ANSYS/LS-DYNA和LS-PREPOST,用ALE算法对射流垂直侵彻横向运动防护板的过程进行模拟分析。防护板在不同速度下干扰射流时,对防护板和后效板上的开坑形状进行分析,并计算后效板上的最终侵深及射流轴线上的速度降,得到射流在横向防护板作用下后效板侵深及射流轴线上的速度降随防护板速度变化的曲线。结果表明,防护板抗射流侵彻能力随防护板速度的增加而增强,尤其是防护板横向速度在0～100m/s增加时,抗射流侵彻能力增强较为明显。     

Theoretical and numerical simulation study on jet formation and penetration of different liner structures driven by electromagnetic pressure

The use of a shaped liner driven by electromagnetic force is a new means of forming jets. To study the mechanism of jet formation driven by electromagnetic force, we considered the current skin effect and the characteristics of electromagnetic loading and established a coupling model of"Electric—Magnetic—Force"and the theoretical model of jet formation under electromagnetic force. The jet formation and penetration of conical and trumpet liners have been calculated. Then, a numerical simulation of liner collapse under electromagnetic force, jet generation, and the stretching motion were performed using an ANSYS multiphysics processor. The calculated jet velocity, jet shape, and depth of penetration were consistent with the experimental results, with a relative error of less than 10％. In addition, we calculated the jet formation of different curvature trumpet liners driven by the same loading condition and ob-tained the influence rule of the curvature of the liner on jet formation. Results show that the theoretical model and the ANSYS multiphysics numerical method can effectively calculate the jet formation of liners driven by electromagnetic force, and in a certain range, the greater the curvature of the liner is, the greater the jet velocity is.     

Chain damage effects of multi-spaced plates by reactive jet impact

Chain damage is a new phenomenon that occurs when a reactive jet impacts and penetrates multi-spaced plates.The reactive jet produces mechanical perforations on the spaced plates by its kinetic energy(KE),and then results in unusual chain rupturing effects and excessive structural damage on the spaced plates by its deflagration reaction.In the present study,the chain damage behavior is initially demonstrated by experiments.The reactive liners,composed of 26 wt％Al and 74 wt％PTFE,are fabricated through a pressing and sintering process.Three reactive liner thicknesses of 0.08 CD,0.10 CD and 0.12 CD(charge diameter)are chosen to carry out the chain damage experiments.The results show a chain rupturing phenomenon caused by reactive jet.The constant reaction delay time and the different penetration velocities of reactive jets from liners with different thicknesses result in the variation of the deflagration position,which consequently determines the number of ruptured plates behind the armor.Then,the finite-element code AUTODYN-3D has been used to simulate the kinetic energy only-induced rupturing effects on plates,based on the mechanism of behind armor debris(BAD).The significant discrepancies between simulations and experiments indicate that one enhanced damage mechanism,the behind armor blast(BAB),has acted on the ruptured plates.Finally,a theoretical model is used to consider the BAB-induced enhancement,and the analysis shows that the rupturing area on aluminum plates depends strongly upon the KE only-induced pre-perforations,the mass of reactive materials,and the thickness of plates.     

Investigate the effects of magnetic fields on the penetration ability of a shaped charge jet at different standoffs

The influence of a magnetic field on the stability of a shaped charge jet is experimentally investigated at standoffs of 490, 650 and 800 mm. The experimental results without and with the magnetic field are compared in terms of the shaped charge jet form, stability and penetration ability. A theoretical model based on one-dimension fluid dynamics is then developed to assess the depth of penetration of the shaped charge at those three standoffs and magnetic conditions. The results show that the penetration capability can be enhanced in more than 70% by the magnetic field. The theoretical calculations are compared with the experimental results with reasonably good correlation. In addition, the parameters introduced in the theory are discussed together with the experiments at three standoffs studied.     

汽油与柴油混合用作柴油机应急燃料的探讨

应急燃料对于提高战时油料保障能力具有重要意义。文章以在-10#军用柴油中掺入90#车用汽油(简称为汽柴混合油)为例,从柴油机燃料应具有的品质性能着手,分析了汽柴混合油作为柴油机应急燃料的可行性。把车用汽油和军用柴油按照不同的比例掺兑,将试验结果与军用柴油的性能要求和美军应急使用指标对某些理化性能的要求相比照, 指出了汽柴混合油作为柴油机燃料的可行性,并提出了建议。     

聚能射流形成过程的理论建模与分析

分析了聚能射流的形成过程,并对其中的各阶段进行了详细建模。在模型中考虑了炸药爆轰、金属的驱动、药型罩压垮以及射流和杵体的形成过程。采用该模型对某一聚能装药结构进行了计算,计算结果表明:药型罩顶部和底部微元的压垮速度较小,在射流头部形成反向速度梯度,与试验数据吻合较好。该模型对于多级侵彻战斗部的工程设计与侵彻参数的计算具有一定的参考价值。     

L波段掺铒光纤放大器增益钳制及提高特性研究

报道了一种新型980 nm激光二极管(LD)泵浦高增益的掺铒光纤放大器(EDFA).通过加入中心波长为1 550 nm光纤光栅(FBG)可以明显提高增益,并分析了增益钳制的原理.实验得到其增益比无FBG结构EDFA提高8 dB,并得到了小信号输入时增益25 dB的有效钳制.